PlansFree plans are now available thanks to the efforts of Matts Myhrman, Judy Knox and Owen Geiger. These low-cost shelter plans include drawings and specifications in three formats – Microsoft Word, JPEG and HTML.
Click here to view the Straw Bale Shelter Plans in Microsoft Word.
Click here to view page one of the plans as a JPEG image.
Click here to view page two of the plans as a JPEG image.
Number of full bales and half bales on each row:
RowFull BalesHalf Bales1120211231104945110694 6310Total number of bales = 68, plus 10 for the roof = 78
List of Materials/Specialty Tools:
– 78 bales
– bale needle (optional)
– 9 pallets, 40 x 48
– flooring material
– window (or plastic sheeting)
– (1) – 3 x 5 lintel
– (7) – 2 to 4 x 12 roof poles
– branches or bamboo
– fabric or plastic sheeting
– tarp: approximately 13 x 15
– Total cost: $300 – $350 US$
– Exterior dimensions: approximately 10-1/2 x 12 = 126 sq. ft.
– Interior dimensions: approximately 7-1/2 x 9 = 68 sq. ft.
– Plans based on two-string bales of approximately 15 x 18 x 36-38
– Stack bales on pallets, add spaces between pallets if necessary to match size of bales, gaps around the edges can be sealed with earth and/or stone.
– Six rows of 15 high bales = 90 interior height.
– Stack bales flat for stability (ties not showing) in a running bond like brickwork (where each bale overlaps the joint below it).
– Extend bales about 1 over edge of pallets to reduce risk of moisture damage.
– Make 10 half bales from 5 full bales. One method uses a bale needle and twine to tie two new half bales before cutting the original strings.
– Other foundation options: tires filled with rammed earth, railroad ties, stone, etc., if pallets are not available.
– Flooring options: plywood, boards (including wood from disassembled pallets), cardboard, new/used carpet, earth, etc. (could add later to save on materials).
– Tie corner bales together on each course.
– Exterior pinning with branches, bamboo, etc. is optional but does increase wall stiffness. Tie pins (one on each side of the wall) together with twine, place twine between bales as walls are stacked, space pins approximately 18 apart (two per bale).
– Lintel over door: approximately 3 diameter x 5 long wood pole, metal pipe, etc. placed on top row of bales, preferably in appropriately deep notch cut into the bales it rests on.
– Window opening starts on the third row and extends to top of wall.
– Roof poles: seven poles 2- 4 diameter x 12 long, set 24 apart, tied to 2 or 3 lower rows of bales to resist uplift (place twine between bales as walls are stacked or use a bale needle to feed twine through the wall).
– Place branches, bamboo, etc. about 3 apart perpendicular to roof poles to support straw above and create 6- 12 overhang beyond surface of wall.
– Add flakes of straw on top of the walls between roof poles.
– Add fabric, plastic sheeting, etc. on top of roof system before adding straw ceiling insulation.
– Straw ceiling insulation: use broken bales or loose straw to create a curved mound. Full bales could be used in extremely hot or cold climates, but a curved surface is still needed to shed water. The increased weight of full bales might require a stronger roof, especially with a snow load.
– Cover the mound with a tarp fastened to the bottom of roof overhang (screws and washers work well).
– Door options: old doors, blankets, woven mats, recycled carpet, hides, etc. (door frame is optional).
– Window options: old windows, plastic sheeting, broken glass set in earth, etc. (window is optional, but valuable for daylight and, perhaps, cross-ventilation).
– Extra bales can be used as steps to reach the upper rows and roof during construction.
– This shelter can be easily upgraded to a permanent shelter by adding plaster, a more durable roof, and other improvements.
– This shelter should be modified to meet local needs. For example, increase the roof overhang in rainy climates.
– Please refer to the leading how-to straw-bale construction guide, Build it With Bales, by Matts Myhrman and S.O. MacDonald for detailed information on building with bales.